UNI-T UTS1015T | Spectrum Analyzer with Tracking Generator

The UNI-T UTS1015T Spectrum Analyzer is a 1.5GHz spectrum analyzer with a tracking generator for RF education, communication testing, filter response checking, EMI pre-compliance preparation, transmitter analysis and electronics R&D work. UNI-T lists the UTS1000B/T Series with 9kHz to 1.5GHz range for UTS1015B/T models, DANL as low as -161dBm typical, phase noise below -98dBc/Hz at 10kHz offset typical, full amplitude precision below 0.7dB, up to 10,001 scanning points, 1Hz minimum RBW, optional EMI/analog demodulation/advanced measurement functions, USB/LAN and SCPI support. The “T” model includes tracking generator support.

Pro Tip

When measuring weak RF signals, first reduce noise-floor uncertainty with proper attenuation, preamp setting and RBW; a clean setup matters as much as the analyzer specification. Buy UNI-T UTS1015T from Kamadi Pakistan for RF spectrum analysis and tracking-generator testing.

Buyer’s Selection Guide

Choose the UTS1015T if you need 1.5GHz spectrum analysis plus tracking generator output. It is suitable for RF labs, filters, amplifiers and education where 3.2GHz or higher frequency range is not required.

Key Features

• 9kHz to 1.5GHz frequency range
  
• Tracking generator support
  
• DANL as low as -161dBm typical
  
• 1Hz minimum RBW
  
• 10.1-inch 1280×800 capacitive touchscreen

Technical Specifications

• Model: UTS1015T
  
• Product Type: Spectrum Analyzer with Tracking Generator
  
• Frequency Range: 9kHz to 1.5GHz
  
• Tracking Generator: Supported
  
• DANL: As low as -161dBm typical
  
• Phase Noise: < -98dBc/Hz at 10kHz offset typical
  
• Amplitude Precision: < 0.7dB
  
• Sweep Points: Up to 10,001
  
• Minimum RBW: 1Hz
  
• Display: 10.1-inch 1280×800 touch screen
  
• Connectivity: USB, LAN, SCPI support

Applications

• RF signal analysis
  
• Filter response testing
  
• Communication equipment checks
  
• EMI pre-compliance preparation
  
• RF education and training labs