Hanna HI98539 Checktemp® Dip | 3m Weighted Probe Thermometer

Checking temperature in tanks, vats, and deep containers can be difficult when a short probe can't safely reach the product. The Hanna HI98539 Checktemp® Dip uses a weighted AISI 316 stainless steel probe on a 3 m silicone cable, letting you lower the sensor into liquids and semi-liquid products without holding the meter at the measurement point.

Its -20.0 to 80.0°C range, 0.1°C resolution and ±0.3°C accuracy suit many food-production checks, including wine casks and milk tanks. CAL Check™ verifies calibration status at startup, while the IP65 housing and large display support routine plant use. Choose HI98539 when depth and probe positioning matter more than a sharp penetration tip.

Lower the weighted probe gently and allow the reading to stabilise before recording it. Buy Hanna HI98539 from Kamadi Pakistan for dependable dip temperature measurement in processing tanks.

Dip Thermometer Selection Guide

Choose HI98539 for deep vessels, tanks or vats where a standard handheld probe cannot conveniently reach the measurement point. The weighted probe helps maintain immersion at depth.

Key Features

• Weighted AISI 316 stainless steel probe
  
• Long 3 m silicone probe cable
  
• CAL Check™ startup verification
  
• Large easy-read display
  
• IP65 water-resistant enclosure
  

Technical Specifications

• Model: HI98539 Checktemp® Dip
  
• Temperature Range: -20.0 to 80.0°C
  
• Resolution: 0.1°C
  
• Accuracy: ±0.3°C
  
• Probe: Weighted stainless steel
  
• Probe Cable: 3 m silicone
  
• Battery: 3 × 1.5V AAA
  
• Battery Life: Approx. 2 years
  
• Auto-Off: 8 min, 60 min or disabled
  
• Protection: IP65
  

Applications

• Wine casks
  
• Milk tanks
  
• Food-processing vessels
  
• Liquid storage tanks
  
• Deep-container temperature checks