Fluke FEV300 | EV Charging Station Test Adapter for AC EVSE Testing

Testing an AC charging station with an actual vehicle is inconvenient and provides limited diagnostic access when a fault occurs. The Fluke FEV300 EV Charging Station Test Adapter simulates an electric vehicle, allowing technicians to activate and evaluate the EVSE using compatible electrical test instruments.

The adapter supports Control Pilot state simulation, cable-current simulation, PE grounding pre-test and CP/PE error simulation, making it useful for commissioning, preventive maintenance and troubleshooting. Technicians can access live conductors through the adapter for measurements with a compatible multimeter, ScopeMeter or multifunction installation tester. Type 1 and Type 2 connector configurations support common AC charging infrastructure. The FEV300 is designed for Mode 3 AC charging-station testing and supports work according to IEC/EN 61851-1 and IEC/HD 60364-7-722.

EVSE Test Adapter Selection Guide

Choose the FEV300 when you need to simulate an EV and expose EVSE test points for measurements with separate instruments. Select the FEV350 where integrated guided test plans, automatic analysis and pass/fail results are preferred.

Market Relevance

As EV charging infrastructure develops in Pakistan, the FEV300 is relevant to EV charger installers, electrical contractors, facility engineers, fleet operators and charging-station maintenance teams. Buy the Fluke FEV300 from Kamadi Pakistan for professional AC EVSE commissioning and troubleshooting.

Key Features

• Simulates electric-vehicle charging states
  
• PE protective-earth pre-test
  
• Control Pilot and PE error simulation
  
• Cable-current capability simulation
  
• Works with compatible Fluke electrical test instruments
  

Technical Specifications

• Model: Fluke FEV300
  
• Single-Phase Input: Up to 250 V
  
• Three-Phase Input: Up to 480 V
  
• Frequency: 50/60 Hz
  
• Maximum Input Current: 10 A
  
• PP Simulation: Open, 13 A, 20 A, 32 A, 63 A
  
• CP States: A, B, C, D
  
• Safety Rating: CAT II 300 V
  
• Ingress Protection: IP54 housing
  
• Operating Temperature: -20°C to 40°C
  

Applications

• EVSE commissioning
  
• AC charger troubleshooting
  
• Periodic EV charger inspection
  
• Control Pilot testing
  
• Charging-station maintenance
  

Professional Tip: Use the PE pre-test before accessing measurement terminals so a potentially dangerous protective-earth condition is identified before further EVSE testing.