All Products

Hydroponic nutrient conditions can drift between manual tests, and unnoticed changes in pH or EC may affect nutrient availability before the next inspection. The Hanna HI981421 GroLine® Hydroponics Monitor is designed for continuous 24/7 pH, EC/TDS and temperature monitoring using an inline multiparameter probe....

A short food probe may give a convenient surface reading but cannot safely reach the centre of deep pots, tanks or large food batches. The Hanna HI145-20 T-Shaped Thermometer addresses this with a 300 mm stainless steel probe, allowing temperature checks deeper inside hot...

Checking the core temperature of meat or semi-frozen food often requires firm probe insertion, and a narrow pen-style thermometer can feel uncomfortable when you need to press hard. The Hanna HI145-00 T-Shaped Thermometer gives food inspectors and kitchen teams a wider handle that is...

Checking temperature in tanks, vats, and deep containers can be difficult when a short probe can't safely reach the product. The Hanna HI98539 Checktemp® Dip uses a weighted AISI 316 stainless steel probe on a 3 m silicone cable, letting you lower the sensor...

Food temperature checks are only useful when the probe is fast, easy to clean and ready when production staff need it. The Hanna HI151 Checktemp®4 is a folding-probe digital thermometer designed for routine food inspection in kitchens, catering, processing and HACCP programs. Its sharp...

Soil EC can change quickly with fertilizer use, irrigation quality and salt build-up, and guessing from plant appearance can delay corrective action. The Hanna HI98331 Soil Test™ gives growers a faster way to check electrical conductivity directly in soil without preparing a liquid extract....

Saltwater aquariums and marine systems can change quickly as water evaporates or you add fresh or saltwater. If salinity moves outside the required level, livestock and process conditions may be affected. We recommend the Hanna HI98319 Marine Salinity Tester for quick digital checks in...

Testing the pH of skin or scalp differs from measuring a liquid because very little moisture is available for normal electrode contact. We recommend the Hanna HI981037 Skin & Scalp pH Tester for cosmetic laboratories and personal-care quality checks that need direct surface measurement....

Dense cuts of meat can make direct probe insertion difficult, especially when you need measurements below the surface. We recommend the Hanna HI981045 Foodcare Meat pH Tester when you want a food-specific pH sensor with the option of using the FC097 stainless steel meat...

Sushi rice needs reliable pH checks, but pushing a conventional glass bulb into sticky rice can give poor surface contact and make cleaning difficult. We recommend the Hanna HI981035 Foodcare Sushi pH Tester for direct measurement during sushi-rice preparation and food-quality checks. Its flat-tip...

Preparing soil slurries for every pH check takes extra time and may not suit growers who need quick measurements at several locations. We recommend the Hanna HI981030 GroLine Soil pH Tester for direct soil measurement and soil-slurry testing. Its specialised conical probe penetrates wetted...

The MacyLab M-2800 UV-Vis Spectrophotometer is a double-beam laboratory instrument designed for absorbance, transmittance and concentration measurements across the ultraviolet and visible spectrum. Its 190–1100 nm wavelength range supports pharmaceutical analysis, biological research, environmental testing, food-quality work and teaching laboratories. Adjustable 1.0/2.0 nm spectral...

The Total TOSLL0401 Laser Level and Distance Measuring Kit combines a green self-levelling line laser with a laser distance detector for layout and distance measurement work. It suits installers, engineers, maintenance teams, interior contractors, and construction users who need both alignment and measurement capabilities....

The Total TLL680081 Self-Leveling Line Laser Kit is a practical layout kit combining a green line laser with a steel measuring tape. It suits electricians, ceiling workers, tile installers, interior decorators, and construction users who need both laser alignment and manual measurement in one...

The Total TLL156601 Self-Leveling Line Laser is a green-beam laser level for alignment, layout, and installation work where better beam visibility is preferred. It suits construction users, electricians, tile installers, ceiling workers, decorators, and interior finishing teams. This model offers a 0- 35m working...

The Total THPTW1220N6 Preset Torque Wrench is suitable for higher-torque fastening in automotive, workshop and mechanical maintenance applications. It is designed for users who need controlled tightening on larger bolts, wheel nuts, and machine assemblies where torque accuracy matters. This model has a 1/2...

The Total THPTW3860N6 Preset Torque Wrench is a mid-range torque tool for controlled tightening in repair, assembly and maintenance jobs. It suits mechanics, technicians, light automotive service, machinery maintenance, and workshop users who need more torque than a 1/4 inch model but less than...

The Total THPTW1425N8 Preset Torque Wrench is designed for small fasteners that require accurate low-torque control. It suits technicians, light mechanical repair, bicycle maintenance, electronics support, and small machinery service and installation jobs where precise tightening matters. This model has a 1/4 inch drive,...

The Total THPTW200N2 Torque Wrench is built for controlled tightening where correct torque matters in automotive, mechanical and maintenance applications. It suits workshops, technicians, mechanics, machine repair teams, and users working on bolts where over- or under-tightening can damage components. This model has a...

The Total THT6186 Bench Vice is a heavy-duty 8-inch vice for workshops, fabrication areas, maintenance benches and mechanical repair tasks. It is suitable for garages, industrial service users, metalworking shops, and repair teams that need greater workpiece-holding capacity. This model measures 8 inches, weighs...